{i measured 3mm for everything. take your ruler and make sure you go up 3mm from the bottom of the box, then place the tape evenly making sure it also covers a 3mm stripe}
{take the same piece of tape and wrap it around each side of the box, measuring to make sure it is even. note: i went around the box twice for each stripe since my tape wasn’t exactly 3mm}
{here is the box with all the taping completed}
{here is the side of the box with the taping completed}
{paint the white areas that are left over (where the tape isn’t covering)}
{after drying for about 20 minutes, here is the front of the completed box!}
{the side of the completed box}
{the top of the completed box! note: see the supply picture above to see how i taped off the top. again, i used 3mm as my measurement throughout}
{how fun is this?! my finished diy kate spade inspired striped nesting boxes in their ikea kallax storage cubbies! so much better than just plain white & of course, I painted 2 other ones in a pretty bright pink!}
Happy DIY’ing!
rkgummer says
Love this!! Such a great DIY. Thanks for sharing <3
http://www.skinnybelle.com/
Mariah says
Where did you get the white baskets that are underneath?
Amanda says
From IKEA!! 🙂
Becca says
Where did you get your shelf unit?
Amanda says
It’s from IKEA! =)